Product Name: Biocide and Biofilm Remover for Primary-Side Circulating Cooling Water
Model: SGR0713
Description: This product is a specialized biocide and biofilm remover designed for the primary-side circulating systems of open-loop liquid cooling setups in computing centers. It is engineered for open systems that are in direct contact with the air—environments prone to the proliferation of bacteria and algae, the accumulation of biological slime, and water quality degradation. Utilizing a stabilized liquid bromine-based active formula, this next-generation, high-efficiency biocide/algaecide requires no activation and can be dosed directly. It overcomes the limitations of traditional chlorine-based biocides, such as loss of efficacy in alkaline water, strong irritation, and equipment corrosion, while maintaining potent biocidal activity across a wide pH range.
Main Ingredients: Bromine-containing compounds, stabilizers.
Physical and Chemical Properties:
Item | Specification |
Appearance | Orange, transparent liquid |
Density (20°C) g/cm³ | ≥ 1.05 |
pH Value (1% aqueous solution) | ≥ 10.0 |
Performance:
① Broad-spectrum biocidal action with dual algaecidal and biofilm-removing capabilities: The highly active bromine-based formula ensures rapid and powerful elimination of waterborne pathogens, saprophytic bacteria, and algae. It also exhibits excellent biofilm-removal properties, effectively clearing stubborn biological slime from the surfaces of pipes, heat exchangers, and cold plates—solving the challenge of biofouling in long-term open-loop system operations.
② Wide pH compatibility and high operational stability: Unlike traditional chlorine-based agents, this product retains high biocidal activity even in alkaline water (pH 7.0–9.5). It is perfectly suited for the water quality fluctuations typical of open-loop liquid cooling systems. It remains stable and effective even under conditions involving high-temperature circulation and continuous aeration, ensuring long-lasting performance.
③ Low corrosivity and compatibility with various materials: Specifically designed for liquid cooling systems containing carbon steel, stainless steel, copper, aluminum alloys, and other materials. When dosed according to guidelines, it causes no corrosive damage to piping, heat exchangers, or server cold plates, and does not compromise the system's protective passivation layer.
④ No activation required; convenient dosing: A single-component, multi-functional product that requires no additional activators. It can be dosed directly (as a concentrate) or diluted. It supports various operational modes—including continuous, intermittent, and shock dosing—and is compatible with automated chemical dosing systems used in computing centers.
⑤ Low residue and low irritation: Features a mild, non-irritating formula with no pungent odors. It is biodegradable after performing its biocidal function, leaves no toxic residues, does not cause abnormal spikes in coolant electrical conductivity, and does not interfere with the precise thermal management or water quality parameters of liquid cooling systems.
Applications: Specifically designed for the sterilization, algaecide treatment, removal of biological slime, and water purification in the primary-side open-loop cooling systems of computing and data centers. It is suitable for systems exposed to the atmosphere, including those with open cooling towers, storage tanks, or high-flow circulation. It serves as a specialized agent for microbial control in primary-side open-loop cooling systems.
Usage: Suitable for routine, ongoing microbial control. Dosage should be based on the total water volume of the system, with a standard concentration of 100–200 mg/L (0.1–0.2 kg/m³). When using a continuous dosing mode, maintain a residual halogen level of 0.1–0.3 mg/L in the system water to provide long-term inhibition of microbial growth and ensure consistent water cleanliness. When a system experiences the proliferation of bacteria and algae, the accumulation of slime, or if the water turns green or becomes turbid, apply a "shock dose" by increasing the concentration to 200–300 mg/L (0.2–0.3 kg/m³). In cases of heavy biological slime or severe contamination, the concentration may be increased to 300–500 mg/L (0.3–0.5 kg/m³). Circulate the solution for 4–6 hours while maintaining an effective residual halogen concentration to thoroughly detach biofilms and eliminate persistent microorganisms. Once the treatment is complete, discharge the water and replenish the system as necessary, depending on the water quality.
Packaging, Storage, and Transportation: The product is packaged in 25 kg, 200 kg, or 1000 kg plastic drums. Store in a cool, dry place; the shelf life is 12 months. Handle with care during transport and avoid impacts.
