Product Name: Anionic Polyacrylamide

I. Properties and Applications
This product is a water-soluble polymer. When used in conjunction with coagulants and flocculants, it primarily acts on the surface of suspended solids through mechanisms such as sweeping and bridging, significantly enhancing coagulation and flocculation efficiency. It is mainly used for sludge dewatering, solid-liquid separation, and the recovery of coal washing, mineral processing, and papermaking wastewater. It can be applied in industrial wastewater and municipal sewage treatment. It can also be used as an additive for drilling mud materials in oilfields and geological exploration.

II. Usage Method and Dosage
When using, prepare an aqueous solution of this product at a concentration of 0.1%. It is advisable to use neutral, salt-free water for dissolution. Sprinkle the product evenly into stirred water; moderate heating (<60°C) can accelerate dissolution. This product should be added after the flocculant. Determine the optimal dosage of this product and adjust the optimal pH value of the water to be treated through preliminary testing. The general dosage is 0.5 to 2 grams per ton of water.

IV. Packaging and Storage
Packaged in woven polypropylene bags with an inner plastic liner, 25 kg per bag.
This product is hygroscopic and must be stored sealed in a cool, dry place at temperatures below 35°C.
Avoid spilling solid product on the floor to prevent slipping hazards due to moisture absorption.

V. Safety Precautions
Operators should wear protective equipment. In case of skin contact, rinse thoroughly with clean water.